Joystick mapper sees OEM PS3 input but doesn't pass it thru

Joystick Mapper discussion.

Joystick mapper sees OEM PS3 input but doesn't pass it thru

Postby ryannosaurus » Mon May 23, 2016 1:24 pm

Hi,

Using an OEM (Sony) PS3 controller, Joystick Mapper sees the controller input (going into the bindings, pressing scan, then pressing a button on the PS3 controller registers the button press) but nothing is passed to any program. The only place I see any response from the controller is in the Joystick Mapper bindings screen.

Please help! Am I missing something here?

Thanks!

Ryan
ryannosaurus
 
Posts: 1
Joined: Mon May 23, 2016 12:31 pm

Re: Joystick mapper sees OEM PS3 input but doesn't pass it t

Postby Reliability77 » Fri May 27, 2016 6:04 am

Bump. Similar problem for me, using factory PS4 remote. Joystick ver 1.1.3 . I am able to scan and map directional buttons and L1/R1 buttons, but Circle Triangle Square and Cross don't register at all.
Reliability77
 
Posts: 1
Joined: Fri May 27, 2016 6:01 am

Re: Joystick mapper sees OEM PS3 input but doesn't pass it t

Postby Rodrigo » Mon May 30, 2016 1:09 am

If nothing is passed to any program, probably the preset is not activated at all?
Dont forget to click on that big box at the left side of the preset in the preset list before using it.
Rodrigo
 
Posts: 471
Joined: Sun Jun 03, 2012 10:24 pm


Return to Joystick Mapper

Who is online

Users browsing this forum: No registered users and 1 guest

cron